Ruger Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
873 Posts

·
Registered
Joined
·
254 Posts
B00034-10_22-Magazine-Latch-new-style-with-extended-tab-black-synthetic-Sturm, Ruger & Co., Inc.

My Ruger came with one. I'm not sure if you have the old style or not but these seem to do the trick. Plus, there only a little under $6!
+1

If you want to be able to release the mag using your trigger finger, then get the TS mag release. (I'm guessing it's long enough to do that)

IMO, just get the stock Ruger mag release. It's cheap and it works fine. I guess it all depends on what you are using your 10/22 for. :)
 

·
Registered
Joined
·
68 Posts
Yes, both of these do serve the same function. Also, as the others mentioned the newer model 10/22 does come with a "extended" mag release. However, it isn't the most comfortable and still quite short for most...

If you are going to spend the $34.99 for the Tactical Solutions release I would recommend you go this route:

Ruger magazine lever-interchangeable

As it is interchangeable between the extended lever to the speed lever with a simple set screw. I have this exact one on my 10/22 and wouldn't change it for the world.

Just my two cents...
 

·
Registered
Joined
·
7 Posts
I put the T-3 extended mag release on to make room for the wider magazines I use on my 10-22 M-1 carbine. It takes a little to get used to when switching 10-22s.
 

·
Registered
Joined
·
2,523 Posts
I had the old style originally...no extension...

Then tried the TI paddle in the link above and did not like it at all...

Got a PC leaver release from MidwayUSA and love it to death...

Didn't know about the kid for approx the same price...

If I was going to start over again knowing what I do now I would try the Kidd...

The smooth originals are nice but hard to use...

The extended ones interfere with grip and bolt lock function imo...

The TI is too big an in the way...but I can see where it would be ideal for run and gun...which is what I think they made it for...

The levers are sweet... the PC had to be "fitted" to be satisfactory to me...but well worth it...
 

·
Registered
Joined
·
8 Posts
Just saw the PWS T3 extended mag release and the shape mimics the shape of my old style release: flat at tip that extended into trigger area, but 1/4" down, extends/widens laterally. Other brands remain flat all the way with no lateral projection. Not sure about the lever, would prefer a more classic look on my wood checkered Sporter model 1022. But beggers can't be choosers. Would include photo of this but have trouble sending photos on this blog. Need way of including photos from my iMac and not a HTTP/URL site.
 
1 - 11 of 11 Posts
Top