Ruger Forum banner

10/22 Magazines sticking fix

913 Views 3 Replies 3 Participants Last post by  pblanc
Purchased a new 10/22 Lite and not all magazines would drop free. What I found was the mag well in the stock was not as wide at the front as it was at the back. What I did was remove the stock and use some 100 grit sandpaper on a thin flat stick to slowly working both sides to open up mag well until all magazines would passed freely. Reassembled and tested. All magazines now drop free, even my BX-25. This worked for me maybe could work for others.


See less See more
1 - 4 of 4 Posts
Thanks for the info. I might try it. Welcome to the forum.
Thanks, looking foreword to being part of the gang!
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.