Ruger Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi All, I’m looking for a replacement Firing Pin for a 10/22 Takedown. I am struggling finding a Part# for it and apparently it is longer than the standard 10/22 item.

Any help appreciated.

Cheers

DaveD:)
 

·
Registered
Joined
·
228 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #3
I bought B-11 from Brownells. Apparently the Takedown model has a longer firing pin.

I e-mailed Ruger for a Part# but have had zero response so far.

Cheers

DaveD:)
 

·
Registered
Joined
·
822 Posts
I'd be interested in finding this out when you get the answer from Ruger............
Nice Rhodesion Ridgeback ...........I had one for 16 years!
 

·
Cat Herder
Joined
·
1,562 Posts
I bought B-11 from Brownells. Apparently the Takedown model has a longer firing pin.

I e-mailed Ruger for a Part# but have had zero response so far.

Cheers

DaveD:)
A 10/22 bolt can be pulled from a standard model and stuck in a TD and vice versa with no change. The firing pins and all other bolt components are totally interchangeable.

Did your firing pin break or have some issue, or are you just looking to upgrade?
 

·
Retired Moderator & Gunsmith
Joined
·
16,077 Posts
blade57, As Spiff noted, all 10/22s (rifles, carbines, TDs, and target models) use Ruger part number B-11 firing pins. I don't know where you got the idea that TD firing pins are longer …. just not true. Another Internet myth?
 
1 - 7 of 7 Posts
Top