Ruger Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
71 Posts
Take it apart...flip the receiver over and then take either a green scotch pad or 0000 steel wool and scrub all the over spray out of the receiver....clean it well and then put some dry lube in the inside of the receiver generously...may want to polish and radius your bolt as well....reassemble and got shoot it....I would think that might help your problem......Good luck....
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top