Ruger Forum banner
1 - 8 of 8 Posts

· Reloading Addict
10,713 Posts
You have to be careful with internet data. One type-o and you could be in trouble. This is a load I started with.
100 gr. Hornady BTSB
start 37 gr. H4350
max. 40 gr.
I used CCI #200 lg. rifle primers.

I started with this and shot good groups but knew I could do better so I upped the charge to 38gr. then 38.5. The start charge turned out to be the best. Then I started working on my col. I measured for my gun and used col. of 2.689 which was .030 off the lans and shot 3/4" groups at 100 yrds. I haven't tried anything else sense. I know this gun will do better cause it will shoot clover leaf groups with factory Rem corlokts. I'll keep working on it.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.