Ruger Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
i purchased a beat up SS that i intend to bead blast
i removed the cylinder and crane, and remove the ejector from the crane, but the crane will not pull off the cylinder? the cylinder will spin on the crane. all thats left in the crane is the ejector spring with the spline on the end?
 

·
Retired Moderator & Gunsmith
Joined
·
16,089 Posts
greatwhitenorth, There is a spring loaded plunger pin that holds the cylinder onto the crane. Just push the pin in and it will release.
 
1 - 3 of 3 Posts
Top