Ruger Forum banner
1 - 1 of 1 Posts

·
Retired Moderator & Gunsmith
Joined
·
18,356 Posts
Go to a hobby shop or a store where they sell Testors model paint. You can use a small drill bit to remove the old paint. Use a toothpick and apply a small drop of "flat white" to your dot. Put the muzzle down while applying and give it a few minutes to dry.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top