[tronicst1]

New barrel and spring are here. Now need to get to the range and see if it works.
Will be taking the Wife and her 38 SPL so she can see if that shoots better. 🤞

 

[tronicst1]

Is the barrel a drop-in deal, requiring no fitting? If so, that's a good deal.

So far, yes. 🤞

 

[tronicst1]

Honest question. What was wrong with the old barrel and spring?

Alot of web sites state not to shoot reloads through a Glock barrel, so I bought
a KKM just in case. Will give it a try and if it doesn't perform well I will use the
original Glock barrel and take my chance with new or once fired brass and
copper jacketed bullets. The spring was just a thought, will see if it works or
not.

 

[tronicst1]

Good luck with the 38 what kind is it

Charter Arms Undercover Lite.

 

[tronicst1]

@Redhawk100 is correct. Jacketed bullets are fine. Lead is an issue. It’s worth the hassle to get polygonal rifling. A Glock barrel lasts forever and is easy to clean…if you are in to all that cleaning stuff.

@rmichael63 is waiting on the new Glock coming out in 41 magnum. Then he will come out of the closet faster than Sam Briton.

YES, I am into all that cleaning stuff !!!

 

[tronicst1]

Going to take the Glock and all the parts to the range and if it turns out that the Factory Parts work better then
so be it. All I want is a reliable small form fit 45 ACP that I can make my own bullets for. In CA you can't always get
factory ammunition anymore and at some point I am going to have to order big on the makings so I don't have to
worry about some new stupid gun laws that might come up.