Ruger Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1
I bought a Wiley Clapp edition GP 100 in Matte Black. Awesome revolver and very accurate. But the problem is I shot the Novak rear sight loose and while shooting steel I would miss to the left. Finally figured it out while cleaning and the sight moved so I recentered it the question is this: Should I use loc-tite on it and/or is there a specific torque value I should use? Thanks for your help in advance
 

·
Registered
Joined
·
234 Posts
Blue Loctite snugged firmly will hold that bad boy in place

Red Loctite is almost as good as a MIG weld

Don't ask me how I know ...

Happy New Year, ya knuckleheads!
 

·
Registered
Joined
·
98 Posts
Red you will need heat to remove, blue regular hand tools for removal. There is a green and purple too. Green is used with electrical connections and believe purple is for soft or dissimilar metals. Not 100 percent sure on the purple
 
1 - 7 of 7 Posts
Top