Ruger Forum banner

Status
Not open for further replies.
1 - 20 of 31 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
New member and Ruger owner. I picked up a SR40C for my CCW. After cleaning out the packing grease & lubing, I put 100 rds. through it and looks like it's going back to Ruger for FTF issues. Otherwise it shot great, and look forward to being a member here.
 

·
Ausmerican.
Joined
·
42,767 Posts
Welcome from Australia mate.
Glad to have you on board, nice folk here and lots of good info.
Have you tried different ammo, some can be a bit picky.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Thanks, yes I tried a couple of different ammo's. It only ftf with the 15rd. mag, both of my 9rd. mags. worked great.
 

·
Registered
Joined
·
2,334 Posts
giday welcome from down under a good mob here
 

·
Registered
Joined
·
3,912 Posts
Welcome from Texas!
 

·
Registered
Joined
·
552 Posts
Welcome from Maryland. I had an issue with one of my magazines for my SR9. They sent me a new mag to try with a return label for the old one. I knew it was the mag that was the problem and I let the person on the phone know that. Theh wanted me to initially send the gun in. They stated that if the new mag repeated the problem, then I was to send the gun in. Might be worth a try with a new mag. Ruger cs was very polite and helpful.
 

·
Boise State Alumnus
Joined
·
660 Posts
Welcome from Virginia
 

·
Registered
Joined
·
10,286 Posts
Welcome to the forum
 

·
Registered
Joined
·
189 Posts
Welcome from a fellow North Carolinian. I had a few similar issues with my SR9c but at 900 rounds now they have long disappeared.
 

·
Registered
Joined
·
3,126 Posts
Welcome from Maine.
 

·
Double P90 Shooter
Joined
·
19,887 Posts
Welcome from the Republic of Texas...
 
1 - 20 of 31 Posts
Status
Not open for further replies.
Top