Ruger Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I hope this is the right forum...

So i took my P95 apart today to clean before i go out to the range this weekend and i accidently knocked the trigger out of the slot, i put it back in place but when i put the gun back together the trigger has a very hard pull, almost have to pull it with both hands. When the hammer is back it fires with ease but if not it doesnt feel right! It is also making a squeeking noise when you pull the trigger.

Iam lost on what to do, please help

Thanks in advance
 

·
Registered
Joined
·
39 Posts
Something didn't go back together correctly. It may not be seating all the way back in its slot. I would pull it back apart and re check your work before something breaks.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
I have pulled it apart a couple of times and it seems like everything is seated properly thats why im baffled :confused:
 

·
Registered
Joined
·
39 Posts
That is odd. I've accidentally popped the trigger out on mine by pulling back the hammer with it stripped down but everything went back together fine and fired fine afterwards.
 
1 - 5 of 5 Posts
Top