Ruger Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
I recently found a used MagGuts kit for my LCP. It adds one more round into the existing magazine and works great. Now I will add a new trigger to the pistol. Bought a Sweet Pea III trigger from eBay. After installing it I will see if it makes shooting more comfortable.
 

·
Registered
Joined
·
22 Posts
Discussion Starter · #2 ·
Iinstalled the sweet pea III trigger on my LCP. Tried to shoot it today. First bullet fired but not the second. The lower set screw in the trigger must have turned a little and stuck out the back of the trigger. This would not let the trigger pull all the way back to fire the gun. Back at home I found that unscrewing this little set screw so that it does not protrude from the back of the trigger was necessary to make the trigger work. Well if this is the case, why even have the screw anyway. I may just take it out completely.
 

·
Registered
Joined
·
385 Posts
Both set screws take some fine tuning, but once set they make the trigger much better.....not to mention the size of the sweet pea is more comfortable too.
 
1 - 3 of 3 Posts
Top