Ruger Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
197 Posts
Discussion Starter #1
I ordered 500 each of .357, .41, and .44 caliber Keith bullets from Leadheads last week and have them already. They look good so I will follow up with some range results as soon as possible.

I really need to stop messing with revolvers and get my deer and elk rifles out. [8D]
 

·
Registered
Joined
·
68 Posts
I have his 158-gr .358" LSWCs, 148-gr .358" BBDEWCs and 168-gr .358" flat base Keith SWCs.

They are all really good bullets and are sized exactly on the numbers. Man, they sure are hard (20-22 BHN).

It's hard to believe he's a one-man operation, isn't it?

I only wish there was a flat-based 158-gr LSWC.
 

·
Registered
Joined
·
197 Posts
Discussion Starter #4
Here are the results from the .41 magnum Blackhawk. Leadhead bullet, 230gr at .411 over 18.5gr of 2400. This bullet needs a good kick in the pants to get the best accuracy. I would really like to try one sized to .412. This load does 1400fps from a 6.5" barrel. Elmer's load was 20.0gr of 2400 which did 1500fps from an 8 3/8" S&W. My primers were quite flat.



Ten shots on each bullseye at 25 yards. Top group is 18.0gr and the bottom is 18.5gr.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top