Ruger Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
If anyone knows a mod to allow to bolt to stay open after the last round can you please provide. I have heard you can mod the magazine to do so.
THIS IS NOT A AUTO BOLT RELEASE QUESTION
Specifically the archangel 10/22 magazine

I will try myself but any help will be appreciated by all I am sure
 

·
Registered
Joined
·
126 Posts
If anyone knows a mod to allow to bolt to stay open after the last round can you please provide. I have heard you can mod the magazine to do so.
I have the 2nd GEN CST Auto Bolt Stop device installed in my iTac 10/22 and it works flawlessly.

Earlier models did require modification of the magazine but the CST 2nd generation auto bolt stop runs with unmodified mags using the Power Custom CNC Match Bolt which is available in the upgrade kits.

You will probably maximize performance if you use the use the factory steel bolt stop pin instead of one of the popular softer polymer type pin bolt buffers which can create "bounce back" on the bolt during firing.

For more details contact Mike Irwin @ CST, Inc. (502) 797-3380.

~ Doc
 
1 - 3 of 3 Posts
Top