Ruger Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3,855 Posts
Discussion Starter #1
The small screw on the left side of the rear sight on my Mark III has come loose. Any reason not to put Lock Tight (blue) on that screw?
 

·
Registered
Joined
·
947 Posts
You are talking about the screw on top and to the left which is the sight base hold-down screw?



That one should have LocTite or some other thread locker sealant applied to it or it will come loose and allow the sight base to walk in the dovetail slot.

R,
Bullseye
 

·
Registered
Joined
·
3,855 Posts
Discussion Starter #3
You are talking about the screw on top and to the left which is the sight base hold-down screw?



That one should have LocTite or some other thread locker sealant applied to it or it will come loose and allow the sight base to walk in the dovetail slot.

R,
Bullseye
Thanks, Bullseye. That is what I was asking and that is what I thought.
 
1 - 3 of 3 Posts
Top