Ruger Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
3,474 Posts
Big hammer?lolol
 

·
Registered
Joined
·
719 Posts
Seems to be inserted correctly. Maybe a defective firing pin?
 

·
Registered
Joined
·
3,191 Posts
Your problem is that you tried to feed it singly. If you would have just loaded it in the mag and fed it from there, you wouldnt have had an issue.
 

·
"The Real Deal"
Joined
·
6,753 Posts
I was thinking the mini threw up the white flag and said "I isn't firing this." If that hadn't happen your shoulder would be flying a white flag to its use anymore.:D
 

·
Registered
Joined
·
85 Posts
Did you slingshot the bolt, or ride it gently forward? I think with the 50 BMG/Mini combo, you're supposed to slingshot it to prevent failure to feed.

Its either that, or you forgot to do your basic preventative maintenance....I think the manual calls for fresh hydraulic, coolant, and blinker fluids every 500 hours of operation.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #12
Thanks for tips. I hit it with a drop of Mobile 1 and that did it.

But I cut my finger on that OTF blade in the trigger card pretty bad.
 

·
Exalted One
Joined
·
1,685 Posts
Here's your problem: I think you need to replace the rear sight with a Tech Sights one.

Or maybe your gas bushing is too robust...
 
1 - 14 of 14 Posts
Top