Ruger Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter #1
I'm not sure what these are going for, but I just picked one up for about $170 value in a trade.
It's a nice little rifle, and I've wanted one for a long time.
 

·
Registered
Joined
·
40 Posts
Discussion Starter #3
I was just reading the box and it says K10/22-22.
I looked on Ruger page, and don't see that model.
Is this an older model?
Thanks!
 

·
Banned
Joined
·
700 Posts
quote:Originally posted by DONALD W. WARREN

Special made for Wal-Mart if I remember correctly.
Yes,Walmart special I believe!
You did fine! Let me know if I can help ya spend some money on tweakin' it!:D
I've got a list of must haves!
Enjoy!:)

SD
 

·
Registered
Joined
·
40 Posts
Discussion Starter #6
Today I got a box from Brownell's with some Volquartsen goodies inside.
I got a Target hammer, hex head take down fastener, extended mag release, and exact edge extractor.
Not sure if any of this was needed, but I get a big discount at Brownell's so I thought I would start off with this stuff.
Not too happy with the target hammer. I'm using the factory mainspring, but the Volquartsen springs seem to make the trigger a touch too light.
I like the other stuff though!
 

·
Banned
Joined
·
700 Posts
quote:Originally posted by czgunner

Not sure if any of this was needed, but I get a big discount at Brownell's so I thought I would start off with this stuff.
Sure it is..That stuff's essentail!:D
You'll love the extractor. The hex stock screw helps prevent the inevitable slotted screw driver gouge in the stock. Also better when torquing to the 30 in lbs specs

The hammer's too light? What's too light? It should be between 2.5-3.0lbs.

SD
 

·
Registered
Joined
·
2,439 Posts
They were going for $214/74 here new + tax and are a good gun. Was classified as a rifle instead of the carbine. They are now about $234 as there was a recent price increase. You did good at that price.
Also add to your parts list to change the recoil buffer pin.
 

·
Registered
Joined
·
2,758 Posts
Congrats on your purchase. I have to get another 10/22 sometime in the near future. Probably one with a synthetic stock and stainless barrel. :D
 
1 - 9 of 9 Posts
Top