Ruger Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
5,004 Posts
Discussion Starter #1
This proceedure is for the P95DPR...

  • Field strip the slide.
  • Place a small slotted screwdriver behind the extractor (1).
  • Push the extractor hook towards the outside of the slide, while appling pressure towards the barrel end of the slide (2). Note: When the extractor is removed from the slide the Decock Lever will be un-retained and may fall out
  • Re-assemble in reverse order.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top