Ruger Forum banner

1 - 19 of 19 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
Will the Magpul Glock mags work in the PC Carbine????

Thanks....

Sent from my KFFOWI using Tapatalk
 

·
Registered
Joined
·
208 Posts
You might want to try it first. My ETS glock 19 9mm 10 round mag was not compatible with my PCC. Got in touch wit ETS and they said some mags will and will not work. They are looking into it. I would like to get a Pmag as well if it works.
 

·
Registered
Joined
·
1 Posts
I have two Magpul 21 round magazines that I have hand cycled dummy rounds through my new Carbine.
Haven't shot it yet.
A 22 round clear ets mag will not lock in my carbine.
Hope this helps,
John
 

·
Registered
Joined
·
15 Posts
Discussion Starter #5
Thanks for the info. I have one coming, will try it before I order more.....

Sent from my KFFOWI using Tapatalk
 

·
Registered
Joined
·
759 Posts
I have 5 -21 round Magpul Glock mags that all work fine in the PCC. They fit with some slop but are solid and feed great. I also have 4 - 10 round Magpul Glock mags that fit good but have not yet fired. I also have the Glock 33 round mag with no problems and one Korean 33 round mag (STS) that also works just fine.
 

·
Registered
Joined
·
3,612 Posts
The ETS mags are spotty at best. The Magpul mags are first rate. Stick with factory Glock, or Magpul, and forget ETS, and you will have no issues
 

·
Registered
Joined
·
15 Posts
Discussion Starter #8
The Magpul mag arrived today, fits & functions fine. Think I like it better than the Glock mags......

Sent from my KFFOWI using Tapatalk
 

·
Registered
Joined
·
571 Posts
The Magpul mag arrived today, fits & functions fine. Think I like it better than the Glock mags......

Sent from my KFFOWI using Tapatalk
That is great to hear. My mags arrived Saturday. Hope to try them this week.
My only issue with them was disassembly to clean them. I had to watch the video available online.
 

·
Registered
Joined
·
233 Posts
Greetings...

I just picked up 2 of the 15 rnd Magpuls for a NIB PC9. After loading, only 1 of them wouldn't lock in easily without jamming it a bit. When the bolt was open it locked in just fine. My guess is after a few runs through the spring will loosen up a tad and it'll work just fine. It locked just fine with only 14 rnds in it, so it's likely just a stiff spring.

AFAIK, just about any 9mm Glock mag will work just fine. The consensus being that Glock mags work much better than the Ruger mags in a Ruger gun! LOL!
 

·
Registered
Joined
·
571 Posts
My magpul P mags function perfectly in my rifle. Sadly Im limited to the ten round ones, due to my Communist state.
Since we are limited to 10rounds I just bought a few Glock 26 10round mags. I like the look in the rifle much better. The dont stick down much at all. Will test function this week.
 

·
Registered
Joined
·
208 Posts
Just an update with the ETS Glock 17 10 round 9mm. I am using the two versions now. One with the 9mm embossed on the followers and the other no 9mm embossed. These are perferctly working on my Ruger PC9. Compared to the stock glock 17 10 round 9mm I find the ETS more fitting unlike the glock which wiggles a bit in the magwell. I have 5 orginal glock 17 mags and 3 ETS 9mm embossed and 2 ETS non-embossed. Will be adding more of these ETS glock 17.
 

·
Registered
Joined
·
37 Posts
My Mag Pul mags are the only mags that have jammed my PC Carbine. A 15 rounder and a 21 rounder. Glock mags are flawless.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
759 Posts
I've used 124gr FMJ and Federal 14 HST in the Magpul Glock mags in my PCC with no problems.
 

·
Registered
Joined
·
20 Posts
Just picked up a new PC9. Fired 50 rounds with the Ruger supplied mag when I picked it up. I brought it home, cleaned it and inserted the Glock magwell. I was surprised how much the mags rock back and forth when inserted. Now this is my first Pistol Caliber Carbine and maybe this is normal, but I’m used to very little movement of a mag when inserted in a pistol. Is this normal?
 

·
Registered
Joined
·
8 Posts
my korean made glock 50 rd drum fires perfect in my model 17, but stove pipes every few rounds in my PC carbine. What's up with that? No problem using a generic 33rd magazine.
Its been noted previously, I just missed the mentions before I bought it, intending to use it on the rifle.

I'm no gunsmith, but I guess I'll start it up somewhere.
 

·
Registered
Joined
·
13 Posts
I've run P-Mags in my PCC ever since I bought it. I has run flawlessly. No rattle and they seat properly. Ejecting the mags is smooth and they drop free. The OEM Glock mags don't drop as quickly and hang up a little.
 
1 - 19 of 19 Posts
Top