Ruger Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Anyone else have problems with keeping their Laser Max zeroed? I find mine drifting off of zero after very minimal carry. I don't want to throw loctite on the screws and then be unable to swap out the battery when the time comes. Any suggestion?
 

·
Registered
Joined
·
55 Posts
My first suggestion is call Lasermax. They may be willing to repair or replace the laser. Otherwise use blue or purple Loctite that will allow you to remove the screws when you need to.

If neither one of those options work out, my last suggestion is buy a Crimson Trace. I have had one on an LC9s for years with no problem.
 

·
Registered
Joined
·
5 Posts
I sure had an issue. Not sure if it was a LaserMax Centerfire Green but that is how advertised. Could be a knockoff. After full elevation reached, target was unable to be acquired. 1/4 turn increments, over 25 rounds could not acquire even at 5 yrds. Consistently low with same wind age spread to right.
144249
 
1 - 5 of 5 Posts
Top