Redhawk 45 colt main spring poundage
1 - 2 of 2 Posts
Joined
·
1,876 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Ruger American Ranch Rifle Magazine.
GunsmithingJust ordered an american ranch rifle in 5.56. Could only find one with the ar mag. I wanted the flush fitting five round but I figured that with all of the craziness going on right now I better take what I could get. I would either like to change it back to the 5 shot oe mag or find a shorter ar...- 0
- 54
-
Dumb question about LCPII part
GunsmithingSorry, but gotta ask. I want a set of the two recoil springs for my .380 LCPII (about a year old, around 2700-3000 rounds through it) -- the Ruger shop website has only springs that say they're for LCP. Do the LCP and LCPII both use the same recoil springs? Don't want to order something that...- 6
- 193
-
PhilBill · updated
-
45 BHB Cylinder Locking After Firing
GunsmithingI have been having an issue with my revolver. The cylinder locks upon firing and I cannot get it to move again until I remove the cylinder and reinstall it. With the cylinder removed and the base pin installed, it works like it should. It also works correctly with the cylinder installed as long...- 42
- 1K
-
Colt SAA remakes - replacing hammer back to traditional firing pin?
GunsmithingHello. Hope y'all having a good weekend so far. I was hoping to get the eyes of some cowboy action buffs or old Colt SAA and SAA clone fans. Recently, I decided to purchase a gun I've always wanted...an remake of the 1873 Colt Single Action Army revolver in 45 Colt with a 7.5 inch barrel. I...- 1
- 155
-
Disgustipated · updated
-
Blue Loctite for 10-22 barrel? to
GunsmithingI have a very nice 10-22 sporter that shoots pretty well. Will gluing the barrel into the receiver with Loctite do anything towards improving the accuracy? Has anyone tried it, and what were your results?- 5
- 261
-
flyboy61 · updated
Join now to ask and comment!