Ruger Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
74 Posts
I just pulled mine out to see if I could find any play. The decocker lever, when the hammer is down, will rotate about 1/4" before slight resistance is felt. Push past the resistance and it will continue to rotate through it's normal cycle. The pin or shaft it rotates on is tight and there is no up/down movement, only rotational.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top