[beeski]

Hi, so about 3 days ago I got bored and decided to practice making stuff in Fusion360.
Since there were no flared magwells made for the P95, I decided to try and make one.

The main issue I had while making the magwell was the magazine insertion. The foot of the baseplate of a 10 round magazine was sticking out too much and not letting the magazine be fully inserted.
.
So I made about 10 different magwells and only one worked with all my regular mags (not the promag drum). The last prototype is a bit blocky, but it works. I did forget to add the magwell flares to it unfortunately.

I ended up running out of filament for my 3d printer after making the last prototype, so I'll have to wait until later next week to finish this project.

 

[PriseDeFer]

Nice work. Glad you stuck with it through the prototyping. When you come back with the flared
model how about a bit of show and tell on the printer?

 

[rmichael63]

I don't want to detract from the OP's project, but what necessitated the need for a mag well? My P95 functions well without one. Maybe I should be asking, what is the purpose of a mag well?

 

[beeski]

I don't want to detract from the OP's project, but what necessitated the need for a mag well? My P95 functions well without one. Maybe I should be asking, what is the purpose of a mag well?

Reloading is easy enough, so there isn't a real need for it. I just made it because it hasn't been done before for a p95.

 

[beeski]

So I finalized the design a bit, I moved some holes and strengthened some areas and added some filets/chamfers to it.
If someone wants to make one of these, I uploaded it to thingiverse with the stl and step files, if you want to modify it too: RUGER P95 Magwell Prototype by raymmmmbro

 

[PriseDeFer]

Quite a professional looking project. Thanks for the link, interesting stuff. But do they have to write it in Greek?