Ruger Forum banner

21 - 25 of 25 Posts

Registered
Joined
49 Posts
Discussion Starter #21
Also sent Vortex a email, about this scope and rifle....what rings to use. 馃榾
Good, they鈥檒l get ya lined out. If you run with Vortex rings make sure you price Sportoptics, they had the prices when I bought mine.They gave me 5% off my total, (over $100 in savings).
Good afternoon, Michael!

I would recommend running a set of the 1.26" PMR Rings - PN# PMR-30-126!

Here is a link: https://vortexoptics.com/vortex-precision-matched-30mm-rings.html?vx_ring_height=927

Vortex reply
 

Registered
Joined
5,620 Posts
That's with the RPR .300 Winchester Magnum right?
Rings/one piece mounts aren鈥檛 caliber specific. It will work on any RPR, regardless of caliber, provided the objective is 50mm or under. If it was say a 56mm it may not have the needed clearance.
 

Registered
Joined
102 Posts
Be aware though! I forgot to mention, There are at least 2 models. (Please excuse my ignorance of terminology) 1) not elevated(which I purchased) and another with 20 or 30 moa built in. I contacted NIKON before ordering & was told since its going on the RPR rifle which already has 20 moa built into the rail, to go with the regular mount. The other in combination with the RPR may have an issue with zeroing the scope at 100 yards(scope may not have enough adjustment)
 
21 - 25 of 25 Posts
Top