Ruger Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Im reloading for my ruger p95 and im using a hornady xtp 147 hp bullet. can anyone tell my what the oal is for that bullet i dont have hornady data. i wanna us TG powder and fc shells.
 

·
Reloading Addict
Joined
·
10,714 Posts
My Hodgdon data shows col. of 1.100 starting with 3.2 grns. tg with a max. of 3.5.
 

·
Registered
Joined
·
304 Posts
The new Hornady manual is out.[9th edition]
The 'old' manual is discounted everywhere....cheap.
It also has the data you need/want.

No 'slam' meant, but.....
on the limited info you provide,
I would not recommend any data.

My best advice:
Start with a reputable manual
Using the component info provided
pick your components from the data.

It is dangerous to trust info from any
internet source.....even from people who mean well.

I am for your safety.
Use a manual [data] that is respected
or don't put the components together.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #5
Yeah i just wanted the depth. i have the speer #14. i want to use tg powder cci500 primer and the only thing i have different than the recipe are the shells i have mixed headstamps. but all the same size as length goes. just wanted to see if the oal differs from different shells. i guess ill just start at start and work up to see if all is good.
 

·
Registered
Joined
·
169 Posts
the new hornady manual is out.[9th edition]
the 'old' manual is discounted everywhere....cheap.
It also has the data you need/want.

No 'slam' meant, but.....
On the limited info you provide,
i would not recommend any data.

My best advice:
Start with a reputable manual
using the component info provided
pick your components from the data.

It is dangerous to trust info from any
internet source.....even from people who mean well.

I am for your safety.
Use a manual [data] that is respected
or don't put the components together.
Amen.
 
1 - 6 of 6 Posts
Top