Ruger Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I am trying to mount a Sightmark SM18017 Night Vision scope on a Mini 14 in 300 BO. The cutouts on the supplied rail do not allow the scope to be mounted with anywhere close to proper eye relief. I purchased a ProMag extended railand am using Vortex Pro Series 30mm high rings to allow clearance for the optics. There is not enough elevation adjustment in the scope and it is shooting about a foot and a half low at 50 yards. Also the rings are right next to each other on the scope tube because the base does not come back far enough on the receiver.
Does anyone know of a Mini 14 rail with some angle built into it or alternate rings that would work. I tried a Burris PEPR mount and used it backwards to get the eye relief I needed but it did not work well with the original Wheeler Rail I used.
 
1 - 2 of 2 Posts
Top