Ruger Forum banner

Status
Not open for further replies.
1 - 13 of 13 Posts

·
Registered
Joined
·
292 Posts
Discussion Starter #1
I have a SP 101 with the spur hammer. Where can I get a suprless hammer with out sending the gun back to ruger. Ruger says they will change out the hammers but will not return the part replaced. I want to keep spur hammer in case I sell the gun at a later date.
 

·
Registered
Joined
·
3,596 Posts
Welcome to the Forum! I would try Brownells. Or Gun Parts Corp. They are the only two that might have one. Sometimes you can find something like that on Ebay as well.
 

·
Registered
Joined
·
1,641 Posts
Welcome aboard, glad to meet you, hope you enjoy it here, jump right in anytime.
 

·
Registered
Joined
·
404 Posts
My understanding is that Ruger will not sell these and I couldn't find any. The spurless hammer from Ruger does not have a single action cocking notch so it makes your SP101 a true DA only. I had a gunsmith cut the spur off mine ($30) and put some serrations for cocking on the stump ($10) that was left. This gets the best of both worlds. Snag-free draw and SA if your situation calls for it.

I'll post pictures when I get it back.
 
1 - 13 of 13 Posts
Status
Not open for further replies.
Top