Ruger Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
130 Posts
My GP100 came with a hammer with some definite play in it. It scrapped slightly on the frame. Shimming (triggershims.com) it really helped smooth things out. I also did the rest of the mods the IBOK, and went slightly lighter on the springs. The trigger is now fantastic, and I have no FTFs. I also put one shim on the trigger (it was tight), and did the hammer dog shims, as it was a little loose.

I like the shims quite well, and they are pretty darned cheap.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top