Ruger Forum banner

1 - 6 of 6 Posts

·
CARSON-WEST - 2016
Joined
·
6,784 Posts
Stock GP100 panels fit the CT for the GP, and I assume that stock SP101 panels would fit the CT for the SP.

 

·
Registered
Joined
·
521 Posts
BuckeyeBlast - OOOOOhhhhh Purty!
 

·
Registered
Joined
·
68 Posts
I have a SP101 with crimson trace and there is no removable panels on it. I have the rubber overmolded style, possibly the other style does have them.
 

·
Registered
Joined
·
621 Posts
Discussion Starter #5
Buckeye is that an original Rosewood panel?

Reason I ask is I have contacted several vendors about panels. A couple have told me their panels won't fit the CT grips. I jump on CT's site and they also have a note about the fixed sight model. I see you have adjustable like me so does that mean we are good to go?
 

·
CARSON-WEST - 2016
Joined
·
6,784 Posts
They're original as far as I know, as I bought the gun used. I did have one set where I had to bevel the back side of the grip panel to get them to fit. Nothing to difficult. Just as long as they're close to the original size, you can take a small piece of sand paper and sand a 45 degree bevel around the back side of the grip panel to get them to fit into the CTs nicely.
 
1 - 6 of 6 Posts
Top