Ruger Forum banner

Ultimate Underfolder Takedown 10/22!

10K views 23 replies 19 participants last post by  Moose458  
#1 · (Edited)
Here is my Takedown 10/22 build!

The Specs:

-Stock Ruger Receiver and Barrel
-Underfolder Stock
-Hornet Trigger Assembly
-Wolf Trigger Springs
-Rimfiretechnologies Red Trigger
-Rimfiretechnologies trigger return torsion spring
-Rimfiretechnologies Red Bolt Handle
-Kidd Red Bolt charging spring
-Rimfiretechnologies Red Magazine Release
-Rimfiretechnologies Red Picatinny Rail
-Rimfiretechnologies Auto Bolt Release
-Kidd Black Scalloped Bolt (Extractor, etc.)
-Buffer Technologies Recoil Buffer
-Bushnell TRS 25 Red Dot
-Simmons Truplex 4x32 Scope
-Butler Creek Flip Up Scope Covers

The Pics:










 
#20 ·
I had the same pattern at 50 with my takedown. Mine is all stock, though. I had got it from what you have at 50 to about a 2 inch group at 50 with one easy change. AMMO! not sure what you used.

My groupings were spread out with federal bulk and similar bulk ammo. I was worried the gun was inaccurate. So i decided to not change anything and try CCI Mini mags. For whatever reason, the groupings were WAY tighter.

At 25 yards, the bulk ammo was just as tight as yours and it didnt matter whether i used CCI or Bulks i still got 1-2 inch groups. But reaching out to 50 the bulk stuff was not as accurate.

I would give that a try.